Related Articles
This story originally appeared on Inside Climate News and is part of the Climate Desk collaboration.
When a baseball-sized hailstone slams into a solar panel at more than 90 mph, the result is not pretty.
We saw this in March, when a hailstorm decimated parts of the 350-MW Fighting Jays solar project in southeast Texas. Images circulated on social media and in news coverage of thousands of panels pockmarked with white circles of broken glass. Right-wing outlets were eager to amplify what they saw as evidence of the unreliability of solar power.
The reality about hail and solar panels is more complicated, and not so grim.
Solar developers and manufacturers have taken steps to reduce the risk from hailstorms, which involves a combination of sophisticated weather forecasting and panels that can turn to avoid direct hits. I recently spoke with some of the people doing this work.
First, let’s lay out the problem: Climate change is contributing to an increase in the severity of storms, including hailstorms.
At the same time, solar is the world’s fastest-growing electricity source, according to the International Energy Agency, and part of a mix of renewable sources that are on track to produce the majority of the world’s electricity by mid-century.
Right now, examples of hailstorms wrecking solar farms are rare enough that they’re still notable, like the one this year in southeast Texas and one last year in western Nebraska. But what about in 20 years, when hailstorms are likely going to be more severe and solar will cover much more ground?
There is no perfect method for protecting solar panels from hail, but there are ways to reduce the risk.
“There’s actual mitigation that can be done,” said Renny Vandewege, vice president of weather operations for DTN, the Minnesota-based company whose subscription-based products include weather forecasting for use by energy companies.
“We’ve patented the ability to measure the occurrence in the size of hail within radar technology,” he said. “Scanning the storms, you get feedback that says that a storm is producing hail two inches in diameter, or whatever the scenario.”
This data is most useful if a solar array has equipment that can respond to an approaching storm by adjusting the panel angle to reduce damage.
Nearly all utility-scale projects being built today use trackers, which are systems that turn the panels during the day to follow the sun. Some of those trackers have the capability to go into “stow” mode, which means they quickly turn to avoid a direct hit.
For example, Nextracker, the California-based manufacturer of solar tracking systems, sells a hail mitigation product that connects weather forecasts from DTN and others, and uses the data to adjust panel angles ahead of hailstorms. The systems are operated with software that can be used both on-site and remotely, and they have battery backups to function during power outages.
“Will solar continue to get developed and built in hail regions? The answer is yes,” said Greg Beardsworth, senior director of product marketing at Nextracker. “The way that will happen is through a combination of understanding the magnitude of the risk based on location, selecting the appropriate combination of module technology and tracker stowing capabilities.”
Most PopularGearThe Top New Features Coming to Apple’s iOS 18 and iPadOS 18By Julian ChokkattuCultureConfessions of a Hinge Power UserBy Jason ParhamSecurityWhat You Need to Know About Grok AI and Your PrivacyBy Kate O'FlahertyGearHow Do You Solve a Problem Like Polestar?By Carlton Reid
The places with the highest risks tend to be in the region sometimes called Tornado Alley, which includes much of the Midwest plus Oklahoma and portions of Texas.
When Beardsworth talks about module technology, he means that some solar panels are being built to be more resistant to damage from large hail. In addition to stronger panels, developers can buy products, like the ones sold by Nextracker, that tilt panels to angles that avoid direct hits.
The use of stowing trackers got a test in 2022 when a hailstorm hit the Prospero 1 and Prospero 2 solar farms in West Texas, which implemented Nextracker equipment.
According to a case study written by Nextracker and the projects’ developer, Longroad Energy, the storm had whiteout conditions and hailstones that ranged from 2 to 3 inches in diameter. The panels were stowed at a 60-degree angle, which was the steepest setting at that time.
In the end, the panels had almost no damage in areas of the solar farms that got hit with 2-inch hail. About one-third of the panels had damage in areas with 3-inch hail.
This was a partial success, but people who studied the data found that the damage could have been even less. VDE Americas, an engineering firm that provides technical advice to energy companies, reviewed data from the storm and concluded the probability of damage could have been reduced almost to zero if the panels had been stowed at a 75-degree angle instead of 60 degrees. (The case study appears in a report issued this month by kWh Analytics, a company that sells insurance and data analytics to renewable energy producers.)
I’d like to see more research on this. None of what I’m citing has been peer reviewed, and the positive talk about these products is coming from the people selling them.
Most PopularGearThe Top New Features Coming to Apple’s iOS 18 and iPadOS 18By Julian ChokkattuCultureConfessions of a Hinge Power UserBy Jason ParhamSecurityWhat You Need to Know About Grok AI and Your PrivacyBy Kate O'FlahertyGearHow Do You Solve a Problem Like Polestar?By Carlton Reid
But it makes sense to me that hail damage can be reduced if a solar farm operator knows when a storm is coming and can shift panels so that the impacts are glancing blows rather than direct collisions.
Turning back to the damage at the Fighting Jays solar farm, the co-owner of the project, Copenhagen Infrastructure Partners, issued a statement in the days after the storm, saying “the plant continues to safely operate at a reduced capacity.”
The company said the damaged panels “contain no cadmium telluride and we have identified no risk to the local community or the environment.” A spokesperson said this week that he had no update from that statement.
The mention of cadmium telluride is a nod to the ludicrous coverage of this incident by outlets such as Fox News. As I’ve written before, opponents of solar power like to raise red flags about the alleged danger to human and animal health from solar panels that contain cadmium. But cadmium is only in a tiny share of panels on the market, and the solar industry uses a form of cadmium that is safer than the form that fuels the scare stories.
The concerned residents whom Fox News interviewed included local activists who oppose solar and who were using untrue or misleading talking points. (Media Matters for America, the left-leaning nonprofit, has a good roundup of who these people are and how their statements were taken at face value.)
I asked the county emergency management office whether there was any evidence of environmental harm because of damage at the solar farm. The office said this question falls under the jurisdiction of the Texas Commission on Environmental Quality.
The response I got from the state office does not indicate that the cracked panels are a public health crisis.
“TCEQ was contacted by the Fort Bend County Emergency Coordinator about this issue, and we will coordinate with them, as needed,” said Victoria Cann, a spokeswoman for the commission.
For people who work in the solar industry, the damage is horrifying and the coverage of it is frustrating.
“It was a lot of loud voices and not a lot of fact or valid analysis,” Beardsworth said.
